Door Repairs Near Me
Repairs to doors are an essential part of every home. They allow us to access and leave our homes, and they also help in securing the house. Door repair professionals can make sure that the doors are functioning correctly while improving the overall look of the house.
Enter your zip code to find rated and reviewed pros close to you.
Broken Glass
Broken glass is an issue that is common in homes and businesses. Broken glass can result from many factors, including children throwing baseballs at windows, or someone bumping off the wall mirror. Whatever the cause is it's always frustrating and unsettling to deal with broken glass.
The most important thing to do is remove the broken glass pieces. This is vital because broken glass can be extremely dangerous, especially when it's broken into small pieces. Glass can cut skin and create lacerations just like sharp needles, sharp knives and razors. It could also pose a health risk because it is contaminated with toxic chemicals and infectious agents.
Bostik Fix & Glue can be used to repair damaged glass. This adhesive can be applied to glass items that have short impact cracks, like picture frames and window panes. It can be used on kitchen glassware, door sidelights and mirrors. It can be used to repair single-pane windows, as well as some automotive glass. Cracks should be clean and dry to ensure that the glue is adhered.
Apply the adhesive with an nozzle that is fine, and lightly press the damaged areas. This will enable the adhesive to bond immediately and stop the cracks from spreading. It is important to keep in mind that small cracks will still be visible following repair, although they won't be as obvious as they were before. Avoid extreme temperature fluctuations because the cracks can expand and contract, which can cause further damage.
Broken Locks
If your lock isn't working properly, you can expose your home to burglars. If you have a DIY repair kit, you can fix broken locks yourself without needing to engage an expert. First, you must identify the root of the issue. There are many possible problems, such as an alignment issue with the mechanical system or a damaged key. It is crucial to get a broken lock repaired quickly prior to it causing further problems.
If you can turn the key in the lock, but it doesn't remain in, you'll have to replace the latch bolt or the lock cylinder itself. It's also recommended to check the door frame and hinges to ensure they're not damaged or loose because this could be the reason behind the broken lock.
A jiggly lock is a sign that the bolt isn't entering or leaving the strike plate inside the frame in a proper manner. You can fix this issue by moving the strike plate in a slight manner. Be cautious not to move it far. Moving the strike plate too much could make the holes for the set screws on the plate too large, leading to an unstable lock.
If you put the key in the lock but it won't turn, it could be dirt or rust in the keyway. Apply a lubricating solution to help the key move freely. You can also try dry lubricants such as graphite powder.
A lock that spins indicates that the tailpiece in the interior of the lock has been damaged. This is typically a cheap part to purchase from a locksmith, and it is replaced within a matter of minutes.
A key that is bent poses a serious security risk, as it could snap off inside the lock and stop you from opening your door. To solve this issue you can make use of a vise to flatten the key, then shape it. If you don't have a vise, you can also place the key between two pieces of wood and then hit it with a hammer or any other heavy object. This will make the key more flat and increase its ability to fit into the lock.
Broken Rollers
The rollers help keep your door in the right alignment. If they are damaged, your door could slide off the track. Replacing the rollers is a easy home repair that can be undertaken by a lot of homeowners. First, remove the sliding door panel from its track. Place it aside.
Then look for the roller adjustment screws or bolts on the bottom of the door frame and loosen them. This will allow you to lift the door up and access the damaged roller. It is a good idea to note where the old roller was located, so you can ensure that the replacement is placed in the same spot.
Next, remove the roller from the track and inspect it for any damage. If you find that the roller is bent and bent, try to bend it back to its original position using a pair of metal bending pliers. If you aren't able to bend the wheel back to its original position it might be necessary to replace the entire roller. Once you have the new roller, install it by following the process to remove the old one.
While you're at it you may also want to consider lubricating the rollers. This will reduce friction and allow the door to move easily. Make sure you use a non-petroleum-based lubricant since petroleum-based lubricants tend to attract dirt faster.
When you're done take care to lower the door back on the track. Be sure to reinstall all the screws and bolts you removed. Also, ensure all the parts are in the proper order. Also, be door repairs near me to adjust the roller's height if needed. It should be at a point where the door does not rub against the threshold, but it must still be capable of rolling up easily.
After a few attempts, you'll be successful in replacing the roller and getting your door running smoothly once more. If you aren't confident in your ability to complete the task, it's a good idea to contact an expert. It's easier for a professional to inspect the issue and determine the best way to proceed.
Broken Hinges
As time passes, the weight of the door can make the hinges loose. This is particularly true if the screws in the frame of the door have been stripped. This is a common problem that can be fixed with only a small amount of effort. You can fix the problem by following a simple method. Drill out the screw that was used and use dowels fill in the hole prior to installing the new screw.
This method is particularly useful for wooden frames and is a better choice than trying to tighten long screws into the hole that is stripped. Using long screws can distort the existing wood and could lead to further problems. The method allows dowels of the same size as existing holes, which provide the most secure and durable fix.
It is important to determine the size of the screw prior to drilling a new hole. The best way to do this is to check the location of the previous screw inside the frame by using a spirit level. Once you know the exact location of the screw hole you can remove the old screw. It shouldn't be difficult as the screw holes can often be enlarged by the screws.
The next step is to measure the thickness of the door jamb and then cut lengths of round dowels that are a bit shorter than this measurement. Once the dowels are cut, they should be put into the hole of the new screw. The glue for the Carpenter should be applied to both sides.
When the glue has a chance to dry it is now time to drill the new screw into the dowel as well as the hole for the hinge. After the screw is installed it is important to allow the dowel to fully become tight.
To prevent any future issues with your door hinges it is a good idea to spray them with the lubricant regularly. This will stop them from squeezing in the open or closed position. You are likely to find a door hinge lubricant at your local home improvement retailer.